Mark the letter A, B, C, or D on your answer sheet to indicate the word whose underlined part differs from the other three in pronunciation in each of the following questions.

Mark the letter A, B, C, or D on your answer sheet to indicate the word whose underlined part differs from the other three in pronunciation in each of the following questions.

Mark the letter A, B, C, or D on your answer sheet to indicate the word that differs from the other three in the position of primary stress in each of the following questions

Mark the letter A, B, C, or D on your answer sheet to indicate the word that differs from the other three in the position of primary stress in each of the following questions

Mark the letter A, B, C, or D on your answer sheet to indicate the word(s) OPPOSITE in meaning to the underlined word(s) in each of the following questions.

Tom was too wet behind the ears to be in charge of such a difficult task.

Mark the letter A, B, C, or D on your answer sheet to indicate the word(s) OPPOSITE in meaning to the underlined word(s) in each of the following questions.

Lisa rarely smiles because she’s shy about exposing her crooked teeth.

Mark the letter A, B, C, or D on your answer sheet to indicate the word(s) CLOSEST in meaning to the underlined word(s) in each of the following questions.

I think Michael hit the nail on the head when he said that what is lacking in this company is the feeling of confidence.

Mark the letter A, B, C, or D on your answer sheet to indicate the word(s) CLOSEST in meaning to the underlined word(s) in each of the following questions.

The most irritating people are those who always disturb others by asking really stupid questions.

Mike is going to New York to study next week.

- Linda: “ ___________________ ”

- Mike: “Thanks. I will write to you when I come to New York.”

Tim: "Where will you go on holiday?” - David " _______ "

They were extremely tired at the end of the journey because they __________ for more than 24 hours.

The fireworks festival is ____________ event that we all want to watch it.

Many tourists have decided to visit Ha Long Bay because of UNESCO’s _____ of its natural beauty.

I’ve been ___________ with my friends for a couple of years.

He denied ___________________ the window of the classroom.

The government is aiming _______  a 40% reduction _________ unemployment.

I thought the party ___________________ really well.

You should be a little more _________  if you want to attract their attention.

I didn’t ___________________ to see my aunt when I was in Paris.

The _________ of new technology transformed our lives.

What does global warming have ___________________ overpopulation?

I think I put my ___________________ in it when I asked Lisa about her ex-husband.

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct word

     Can we see (23) _______ the earth is a globe? Yes, we can, when we watch a ship that sails out to sea. If we watch closely, we see that the ship begins (24) _______. The bottom of the ship disappears first, and then the ship seems to sink lower and lower, (25) _______we can only see the top of the ship, and then we see nothing at all. What is hiding the ship from us? It is the earth. Stick a pin most of the way into an orange, and (26) _______  turn the orange away.

Điền vào số (23)

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct word

      Can we see (23) _______ the earth is a globe? Yes, we can, when we watch a ship that sails out to sea. If we watch closely, we see that the ship begins (24) _______. The bottom of the ship disappears first, and then the ship seems to sink lower and lower, (25) _______we can only see the top of the ship, and then we see nothing at all. What is hiding the ship from us? It is the earth. Stick a pin most of the way into an orange, and (26) _______  turn the orange away.

Điền vào số (24)

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct word

       Can we see (23) _______ the earth is a globe? Yes, we can, when we watch a ship that sails out to sea. If we watch closely, we see that the ship begins (24) _______. The bottom of the ship disappears first, and then the ship seems to sink lower and lower, (25) _______we can only see the top of the ship, and then we see nothing at all. What is hiding the ship from us? It is the earth. Stick a pin most of the way into an orange, and (26) _______  turn the orange away.

Điền vào số (25)

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct word

       Can we see (23) _______ the earth is a globe? Yes, we can, when we watch a ship that sails out to sea. If we watch closely, we see that the ship begins (24) _______. The bottom of the ship disappears first, and then the ship seems to sink lower and lower, (25) _______we can only see the top of the ship, and then we see nothing at all. What is hiding the ship from us? It is the earth. Stick a pin most of the way into an orange, and (26) _______  turn the orange away.

Điền vào số (26)

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct word

       Can we see (23) _______ the earth is a globe? Yes, we can, when we watch a ship that sails out to sea. If we watch closely, we see that the ship begins (24) _______. The bottom of the ship disappears first, and then the ship seems to sink lower and lower, (25) _______we can only see the top of the ship, and then we see nothing at all. What is hiding the ship from us? It is the earth. Stick a pin most of the way into an orange, and (26) _______  turn the orange away.

Điền vào số (27)

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 28 to 34.

  Because the low latitudes of the Earth, the areas near the equator, receive more heat than the latitudes near the poles, and because the nature of heat is to expand and move, heat is transported from the tropics to the middle and high latitudes. Some of this heat is moved by winds and some by ocean currents, and some gets stored in the atmosphere in the form of latent heat. The term “latent heat” refers to the energy that has to be used to convert liquid water to water vapor. We know that if we warm a pan of water on a stove, it will evaporate, or turn into vapor, faster than if it is allowed to sit at room temperature. We also know that if we hang wet clothes outside in the summertime, they will dry faster than in winter, when the temperature is lower. The energy used in both cases to change liquid water to water vapor is supplied by heat - supplied by the stove in the first case and by the Sun in the latter case. This energy is not lost. It is stored as vapor in the atmosphere as latent heat. Eventually, the water stored as vapor in the atmosphere will condense to liquid again, and the energy will be released to the atmosphere.

          In the atmosphere, a large portion of the Sun’s incoming energy is used to evaporate water, primarily in the tropical oceans. Scientists have tried to quantify this proportion of the Sun’s energy. By analyzing temperature, water vapor, and wind data around the globe, they have estimated the quantity to be about 90 watts per square meter, or nearly 30 percent of the Sun’s energy. Once this latent heat is stored within the atmosphere, it can be transported, primarily to higher latitudes, by prevailing, large - scale winds. Or it can be transported vertically to higher levels in the atmosphere, where it forms clouds and subsequent storms, which then release the energy back to the atmosphere.

The passage mainly discusses how heat __________

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 28 to 34.

  Because the low latitudes of the Earth, the areas near the equator, receive more heat than the latitudes near the poles, and because the nature of heat is to expand and move, heat is transported from the tropics to the middle and high latitudes. Some of this heat is moved by winds and some by ocean currents, and some gets stored in the atmosphere in the form of latent heat. The term “latent heat” refers to the energy that has to be used to convert liquid water to water vapor. We know that if we warm a pan of water on a stove, it will evaporate, or turn into vapor, faster than if it is allowed to sit at room temperature. We also know that if we hang wet clothes outside in the summertime, they will dry faster than in winter, when the temperature is lower. The energy used in both cases to change liquid water to water vapor is supplied by heat - supplied by the stove in the first case and by the Sun in the latter case. This energy is not lost. It is stored as vapor in the atmosphere as latent heat. Eventually, the water stored as vapor in the atmosphere will condense to liquid again, and the energy will be released to the atmosphere.

          In the atmosphere, a large portion of the Sun’s incoming energy is used to evaporate water, primarily in the tropical oceans. Scientists have tried to quantify this proportion of the Sun’s energy. By analyzing temperature, water vapor, and wind data around the globe, they have estimated the quantity to be about 90 watts per square meter, or nearly 30 percent of the Sun’s energy. Once this latent heat is stored within the atmosphere, it can be transported, primarily to higher latitudes, by prevailing, large - scale winds. Or it can be transported vertically to higher levels in the atmosphere, where it forms clouds and subsequent storms, which then release the energy back to the atmosphere.

The passage mentions that the tropics differ from the Earth’s polar regions in which of the following ways?

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 28 to 34.

  Because the low latitudes of the Earth, the areas near the equator, receive more heat than the latitudes near the poles, and because the nature of heat is to expand and move, heat is transported from the tropics to the middle and high latitudes. Some of this heat is moved by winds and some by ocean currents, and some gets stored in the atmosphere in the form of latent heat. The term “latent heat” refers to the energy that has to be used to convert liquid water to water vapor. We know that if we warm a pan of water on a stove, it will evaporate, or turn into vapor, faster than if it is allowed to sit at room temperature. We also know that if we hang wet clothes outside in the summertime, they will dry faster than in winter, when the temperature is lower. The energy used in both cases to change liquid water to water vapor is supplied by heat - supplied by the stove in the first case and by the Sun in the latter case. This energy is not lost. It is stored as vapor in the atmosphere as latent heat. Eventually, the water stored as vapor in the atmosphere will condense to liquid again, and the energy will be released to the atmosphere.

          In the atmosphere, a large portion of the Sun’s incoming energy is used to evaporate water, primarily in the tropical oceans. Scientists have tried to quantify this proportion of the Sun’s energy. By analyzing temperature, water vapor, and wind data around the globe, they have estimated the quantity to be about 90 watts per square meter, or nearly 30 percent of the Sun’s energy. Once this latent heat is stored within the atmosphere, it can be transported, primarily to higher latitudes, by prevailing, large - scale winds. Or it can be transported vertically to higher levels in the atmosphere, where it forms clouds and subsequent storms, which then release the energy back to the atmosphere.

The word “convert” is closest in meaning to ________ .

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 28 to 34.

  Because the low latitudes of the Earth, the areas near the equator, receive more heat than the latitudes near the poles, and because the nature of heat is to expand and move, heat is transported from the tropics to the middle and high latitudes. Some of this heat is moved by winds and some by ocean currents, and some gets stored in the atmosphere in the form of latent heat. The term “latent heat” refers to the energy that has to be used to convert liquid water to water vapor. We know that if we warm a pan of water on a stove, it will evaporate, or turn into vapor, faster than if it is allowed to sit at room temperature. We also know that if we hang wet clothes outside in the summertime, they will dry faster than in winter, when the temperature is lower. The energy used in both cases to change liquid water to water vapor is supplied by heat - supplied by the stove in the first case and by the Sun in the latter case. This energy is not lost. It is stored as vapor in the atmosphere as latent heat. Eventually, the water stored as vapor in the atmosphere will condense to liquid again, and the energy will be released to the atmosphere.

          In the atmosphere, a large portion of the Sun’s incoming energy is used to evaporate water, primarily in the tropical oceans. Scientists have tried to quantify this proportion of the Sun’s energy. By analyzing temperature, water vapor, and wind data around the globe, they have estimated the quantity to be about 90 watts per square meter, or nearly 30 percent of the Sun’s energy. Once this latent heat is stored within the atmosphere, it can be transported, primarily to higher latitudes, by prevailing, large - scale winds. Or it can be transported vertically to higher levels in the atmosphere, where it forms clouds and subsequent storms, which then release the energy back to the atmosphere.

Why does the author mention “the stove” in the passage?

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 28 to 34.

  Because the low latitudes of the Earth, the areas near the equator, receive more heat than the latitudes near the poles, and because the nature of heat is to expand and move, heat is transported from the tropics to the middle and high latitudes. Some of this heat is moved by winds and some by ocean currents, and some gets stored in the atmosphere in the form of latent heat. The term “latent heat” refers to the energy that has to be used to convert liquid water to water vapor. We know that if we warm a pan of water on a stove, it will evaporate, or turn into vapor, faster than if it is allowed to sit at room temperature. We also know that if we hang wet clothes outside in the summertime, they will dry faster than in winter, when the temperature is lower. The energy used in both cases to change liquid water to water vapor is supplied by heat - supplied by the stove in the first case and by the Sun in the latter case. This energy is not lost. It is stored as vapor in the atmosphere as latent heat. Eventually, the water stored as vapor in the atmosphere will condense to liquid again, and the energy will be released to the atmosphere.

          In the atmosphere, a large portion of the Sun’s incoming energy is used to evaporate water, primarily in the tropical oceans. Scientists have tried to quantify this proportion of the Sun’s energy. By analyzing temperature, water vapor, and wind data around the globe, they have estimated the quantity to be about 90 watts per square meter, or nearly 30 percent of the Sun’s energy. Once this latent heat is stored within the atmosphere, it can be transported, primarily to higher latitudes, by prevailing, large - scale winds. Or it can be transported vertically to higher levels in the atmosphere, where it forms clouds and subsequent storms, which then release the energy back to the atmosphere.

According to the passage, most ocean water evaporation occurs especially _________ .

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 28 to 34.

  Because the low latitudes of the Earth, the areas near the equator, receive more heat than the latitudes near the poles, and because the nature of heat is to expand and move, heat is transported from the tropics to the middle and high latitudes. Some of this heat is moved by winds and some by ocean currents, and some gets stored in the atmosphere in the form of latent heat. The term “latent heat” refers to the energy that has to be used to convert liquid water to water vapor. We know that if we warm a pan of water on a stove, it will evaporate, or turn into vapor, faster than if it is allowed to sit at room temperature. We also know that if we hang wet clothes outside in the summertime, they will dry faster than in winter, when the temperature is lower. The energy used in both cases to change liquid water to water vapor is supplied by heat - supplied by the stove in the first case and by the Sun in the latter case. This energy is not lost. It is stored as vapor in the atmosphere as latent heat. Eventually, the water stored as vapor in the atmosphere will condense to liquid again, and the energy will be released to the atmosphere.

          In the atmosphere, a large portion of the Sun’s incoming energy is used to evaporate water, primarily in the tropical oceans. Scientists have tried to quantify this proportion of the Sun’s energy. By analyzing temperature, water vapor, and wind data around the globe, they have estimated the quantity to be about 90 watts per square meter, or nearly 30 percent of the Sun’s energy. Once this latent heat is stored within the atmosphere, it can be transported, primarily to higher latitudes, by prevailing, large - scale winds. Or it can be transported vertically to higher levels in the atmosphere, where it forms clouds and subsequent storms, which then release the energy back to the atmosphere.

According to the passage, 30 percent of the Sun’s incoming energy _______

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 28 to 34.

  Because the low latitudes of the Earth, the areas near the equator, receive more heat than the latitudes near the poles, and because the nature of heat is to expand and move, heat is transported from the tropics to the middle and high latitudes. Some of this heat is moved by winds and some by ocean currents, and some gets stored in the atmosphere in the form of latent heat. The term “latent heat” refers to the energy that has to be used to convert liquid water to water vapor. We know that if we warm a pan of water on a stove, it will evaporate, or turn into vapor, faster than if it is allowed to sit at room temperature. We also know that if we hang wet clothes outside in the summertime, they will dry faster than in winter, when the temperature is lower. The energy used in both cases to change liquid water to water vapor is supplied by heat - supplied by the stove in the first case and by the Sun in the latter case. This energy is not lost. It is stored as vapor in the atmosphere as latent heat. Eventually, the water stored as vapor in the atmosphere will condense to liquid again, and the energy will be released to the atmosphere.

          In the atmosphere, a large portion of the Sun’s incoming energy is used to evaporate water, primarily in the tropical oceans. Scientists have tried to quantify this proportion of the Sun’s energy. By analyzing temperature, water vapor, and wind data around the globe, they have estimated the quantity to be about 90 watts per square meter, or nearly 30 percent of the Sun’s energy. Once this latent heat is stored within the atmosphere, it can be transported, primarily to higher latitudes, by prevailing, large - scale winds. Or it can be transported vertically to higher levels in the atmosphere, where it forms clouds and subsequent storms, which then release the energy back to the atmosphere.

The underlined word “it” refers to _____ .

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

  Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

  The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

The passage mainly discusses ancient Greek pottery and its __________ .

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

  Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

  The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

It can be inferred from the passage that most pottery establishments in ancient Greece were situated ___________ .

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

  Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

  The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

The word “marked” in the first paragraph is closest in meaning to __________ .

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

  Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

  The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

The word “confine” in the second paragraph is closest in meaning to _________ .

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

  Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

  The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

It can be inferred from the passage that terra-cotta had which of the following advantages?

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

  Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

  The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

The word “presumably” in the second paragraph is closest in meaning to ____________ 

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

  Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

  The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

The word “they” in the second paragraph refers to __________________.

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

  Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

  The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

According to the passage, all of the following are true of ancient Greek potters and vase painters EXCEPT __________________.

Mark the letter A, B, C, or D on your answer sheet to indicate the sentence that is closest in meaning to each of the following questions.

Our chances of success are very small.

Mark the letter A, B, C, or D on your answer sheet to indicate the sentence that is closest in meaning to each of the following questions.

There were so many people on the bus that Sally couldn’t get a seat.

Mark the letter A, B, C, or D on your answer sheet to indicate the sentence that is closest in meaning to each of the following questions.

“No, no, you really must stay with us!'' said the children.

Mark the letter A, B, C, or D on your answer sheet to indicate the underlined part that needs correction in each of the following questions.

Pointing in someone is usually considered rude but it is acceptable when teachers want to

Mark the letter A, B, C, or D on your answer sheet to indicate the underlined part that needs correction in each of the following questions.

The bones of the elderly are more prone to fractures than of young people.

Mark the letter A, B, C, or D on your answer sheet to indicate the underlined part that needs correction in each of the following questions.

Lack of animal protein in a diet is a serious cause for malnutrition.

Mark the letter A, B, C, or D on your answer sheet to indicate the sentence that best combines each pair of sentences in the following questions.

She did not study hard. She failed the exam.

Mark the letter A, B, C, or D on your answer sheet to indicate the sentence that best combines each pair of sentences in the following questions.

You cannot completely avoid stress in your life. You need to find ways to cope with it.